Step 1: Reset Your Device
To begin, you'll need to reset your Alertify device. Locate the small hole at the bottom of the device.
Take a pin and insert it into the hole.
Keep the pin in place until you hear a buzzing sound and see all the LEDs flash blue.
Once this happens, remove the pin.
After a brief moment, typically a few seconds to a minute, you should see a network named "Alertify AP" appear in your list of available WiFi networks.
Step 2: Connect to the Alertify AP Network
Connect your device to the "Alertify AP" network. This network will allow you to access the setup interface for your Alertify device.
Step 3: Access the Setup Interface
Open a web browser on a device connected to the "Alertify AP" network and enter the following link into the address bar: http://192.168.4.1/. This will take you to the setup interface for your Alertify device.
Step 4: Follow Setup Steps
Once you've accessed the setup interface, you'll need to follow the same steps you did when you initially set up your device. This includes providing the necessary information for connecting to your new WiFi network, such as the network name and password.
Step 5: Complete Setup
After entering the new WiFi information, proceed through the setup process as instructed. Once completed, your Alertify device should be successfully connected to the new WiFi network.
That's it! You've now successfully changed the WiFi network your Alertify device is connected to. If you encounter any issues during the process, refer back to these steps or reach out to our support team at support@alertify.io for assistance.